Karakteristik Perpindahan Panas Dan Penurunan Tekanan Pin Fin Cooling Susunan Segaris Segaris Pada Trailing Edges Sudu Turbin Gas

FAISHAL, ADNAN ARIF (2016) Karakteristik Perpindahan Panas Dan Penurunan Tekanan Pin Fin Cooling Susunan Segaris Segaris Pada Trailing Edges Sudu Turbin Gas. Skripsi thesis, Universitas Muhammadiyah Surakarta.

	PDF (NASKAH PUBLIKASI) Naskah Publikasi.pdf Download (1MB)
	PDF (HALAMAN DEPAN) HALAMAN DEPAN.pdf Download (1MB)
	PDF (BAB I) BAB 1.pdf Download (201kB)
	PDF (BAB II) BAB 2.pdf Restricted to Repository staff only Download (797kB)
	PDF (BAB III) BAB 3.pdf Restricted to Repository staff only Download (1MB)
	PDF (BAB IV) BAB 4.pdf Restricted to Repository staff only Download (801kB)
	PDF (BAB V) BAB 5.pdf Restricted to Repository staff only Download (90kB)
	PDF (DAFTAR PUSTAKA) DAFTAR PUSTAKA.pdf Download (189kB)
	PDF (LAMPIRAN) LAMPIRAN.pdf Restricted to Repository staff only Download (1MB)
	PDF (PERNYATAAN PUBLIKASI ILMIAH) SURAT PERNYATAAN PUBLIKASI KARYA ILMIAH.pdf Restricted to Repository staff only Download (16kB)

Abstract

ABSTRACT This CFD study presents the performance evaluation of a blade cooling passage. An experimental model with seven-row of inline circular pin-fins is chosen in this study. Simulations consider two types; i.e. ‘warm’ test with isothermal wall condition and ‘cold’ test with adiabatic wall condition respectively, in order to evaluate flow and thermal characteristics such as heat transfer coefficient (HTC) and friction factor (f). The steady RANS with k-epsilon turbulence model was carried out by two-stages investigating: firstly, validation of an existing circular staggered array of pin-fin cooling that has been experimentally studied by other researcher. Three types structured mesh from coarse (Δy+ = 11.83) to fine (Δy+ = 1.23) were applied for validation. Secondly, further investigation of the circular pin-fin cooling with in-line array was simulated by adopting the same scenario of mesh generation based on the optimum result from validation stage. Simulations were performed by keeping the same initials and boundary conditions as experiment, and varying Reynolds number between 9.000 and 36.000. The result indicates that the CFD predicted data can be considered acceptable by generating mesh up to 1.6 million elements with fine resolution (Δy+ = 1.23). The CFD predicted HTC and pressure loss are in good agreement with available experimental data, though over-prediction data is clearly seen after the second pin-fin row for warm simulation. By comparing the pin-fin array between “staggered” and “in-line”, it was found that the HTC of staggered array is higher than the in-line orientation. It is due to the staggered layout causes to intensify the coolant flow around the pin-fin. The HTC of pin-fins surface increases moderately along the cooling passage due to the increase of flow turbulence that caused by contraction channel and increasing Reynolds number. Whilst, the friction factor decreases gradually along the cooling passage. Key words : Pin-fin cooling; Computational fluid dynamics; Heattransfer coefficient

Item Type:	Karya ilmiah (Skripsi)
Uncontrolled Keywords:	Computational Fluid Dynamics; Pin-fin Cooling; Koefisien perpindahan panas.
Subjects:	T Technology > T Technology (General) T Technology > TJ Mechanical engineering and machinery
Divisions:	Fakultas Teknik > Teknik Mesin
Depositing User:	ADNAN ARIF FAISHAL
Date Deposited:	15 Feb 2016 12:50
Last Modified:	15 Feb 2016 12:50
URI:	http://eprints.ums.ac.id/id/eprint/41591

Actions (login required)

View Item