Analisis Tegangan Komponen Poros, Roda Gigi Lurus Dan Roda Gigi Muka Mesin Molen Semen Dengan Metode Elemen Hingga

Hutomo, Aditya and , Ir. Agung Setyo Darmawan, S.T, M.T, IPM (2023) Analisis Tegangan Komponen Poros, Roda Gigi Lurus Dan Roda Gigi Muka Mesin Molen Semen Dengan Metode Elemen Hingga. Skripsi thesis, Universitas Muhammadiyah Surakarta.

	PDF (Naskah Publikasi) NASKAH PUBLIKASI_D200190070_ADITYA HUTOMO.pdf Download (554kB)
	PDF (Surat Pernyataan Publikasi) SURAT PERNYATAAN PUBLIKASI_D200190070_ADITYA HUTOMO_TUGAS AKHIR.pdf Restricted to Repository staff only Download (419kB)

Abstract

Transmission is the process of forwarding and changing the rotational speed of a component to the desired rotational speed of other transmission elements. This study aims to compare the results between mathematical calculations (manual) with the finite element method in straight gear design and check the safety of the components of the design results. Tests were carried out on shafts made of S30C, spur gears and face gears made of nodular cast iron. The component modeling process uses Solidworks 2020 software and the finite element method analysis uses Ansys 2021 R1 software. The results of mathematical calculations (manually) show that the shaft shear stress is 1,611 N/mm2, the maximum spur gear stress is 69,033 N/mm2, and the face gear maximum stress is 19,265 N/mm2. The results of finite element analysis showed that the shaft shear stress was 1,6613 N/mm2, the maximum spur gear stress was 71,827 N/mm2, and the face gear maximum stress was 20,221 N/mm2. Comparison of the simulation process with mathematical (manual) calculations obtained a maximum deviation of 4,727 %. The value of this deviation is acceptable because it is less than 5% and the designed components are safe to use because the working voltage is less than the permissible stress.

Item Type:	Thesis (Skripsi)
Uncontrolled Keywords:	Transmission, Spur Gear, Finite Element Method, Ansys
Subjects:	T Technology > TJ Mechanical engineering and machinery
Divisions:	Fakultas Teknik > Teknik Mesin
Depositing User:	ADITYA HUTOMO
Date Deposited:	21 Aug 2023 02:50
Last Modified:	21 Aug 2023 02:50
URI:	http://eprints.ums.ac.id/id/eprint/115615

Actions (login required)

View Item