Studi Parameter ModelPenangkap Angin Pada Sistem TowerPendinginan Evaporasi Menggunakan CFD Untuk Mendapatkan Laju optimal Udara

Abdullah, Abdullah and , Ir. Sarjito, MT, Ph.D and , Nur Aklis,ST,M.Eng. (2017) Studi Parameter ModelPenangkap Angin Pada Sistem TowerPendinginan Evaporasi Menggunakan CFD Untuk Mendapatkan Laju optimal Udara. Skripsi thesis, Universitas Muhammadiyah Surakarta.

	PDF (NASKAH PUBLIKASI) naskah publikasi ilmiah ab.pdf Download (853kB)
	PDF (HALAMAN DEPAN) halaman judul.pdf Download (479kB)
	PDF (BAB I) BAB I.pdf Download (14kB)
	PDF (BAB II) BAB II A.pdf Restricted to Repository staff only Download (564kB) | Request a copy
	PDF (BAB III) BAB III.pdf Restricted to Repository staff only Download (232kB) | Request a copy
	PDF (BAB IV) BAB IV.pdf Restricted to Repository staff only Download (332kB) | Request a copy
	PDF (BAB V) BAB V.pdf Restricted to Repository staff only Download (9kB) | Request a copy
	PDF (DAFTAR PUSTAKA) DAFTAR PUSTAKA.pdf Download (8kB)
	PDF (LAMPIRAN) LAMPIRAN.pdf Restricted to Repository staff only Download (123kB) | Request a copy
	PDF (SURAT PERNYATAAN NASKAH PUBLIKASI) SURAT PERNYATAAN.pdf Restricted to Repository staff only Download (304kB) | Request a copy

Abstract

This research is an extension of previous researchers about wind catcher using computational fluid dynamic (CFD). The previous research did not use baffle variations. The aim of the research work was to compare two type ability of wind catcher in obtaining optimum mass flow rate. The first type was wind catcher was designed without baffle and second type was wind catcher designed using baffle that consisted of; wind catcher with cylinder baffle, square baffle, plus with four holes baffle, and combined wind catcher with eight holes baffle. Simulation was carried out in vary of incoming wind speed of 0.5m/s to 5m/s at 11,5m height. Due to the complexity of geometry then unstructured mesh was adopted. The wind catcher without baffle resulted total element of 1237341, whereas, wind catcher with cylinder baffle resulted in 2090432 element, square baffle resulted element of 2366514, baffle plus resulted in element of 4425278, and combined baffle produced element of 7747840. Initially, The k-epsilon turbulen model was selected in this simulation as it is robust in time. The parametric study of wind catcher model was carried out in two steps; the first step was comparing performa of five shape of wind catcher. Where, the wind catcher with four holes with plus baffle resulting optimum mass flow rate, and the second performance was demonstrated by studying effect of extension baffle. In this study, wind catcher was modified by extending baffle of 1m. Result of the comparison study showed that wind catcher with one extension baffle resulted an optimal performance. Further simulation was by investigating different inflation boundary layer and different turbulen model. In studying inflation boundary layer, total maximum of layer was varying from: 5, 10, 15, dan 20 at wind speed of 5 m/s. The optimum performance was reached by maximum layer of 10. The study of turbulence model was carried out at all simulation involved k-epsilon, Shear Stress Transport, BSL Reynold Stress, dan SSG Reynold Stress turbulence model. The wind speed was set as same as in studying inflation boundary layer of 5 m/s. The Studi showed that SSG Reynold Stress turbulen model was able to reach an optimum performance. All simulation was carried out using ANSYS,version 15.0.

Item Type:	Karya ilmiah (Skripsi)
Uncontrolled Keywords:	CFD, Wind Catcher, natural ventilation
Subjects:	T Technology > TJ Mechanical engineering and machinery
Divisions:	Fakultas Teknik > Teknik Mesin
Depositing User:	Abdullah
Date Deposited:	07 Feb 2017 02:51
Last Modified:	07 Feb 2017 02:51
URI:	http://eprints.ums.ac.id/id/eprint/48844

Actions (login required)

View Item