Perencanaan Gedung Apartemen 7 Lantai di Jakarta Utara Berdasarkan SNI 1726:2019 dan SNI 2847:2019

Dwitianto, Rizki Dimas and , Ir. Budi Setiawan, S.T., M.T. (2026) Perencanaan Gedung Apartemen 7 Lantai di Jakarta Utara Berdasarkan SNI 1726:2019 dan SNI 2847:2019. Skripsi thesis, Universitas Muhammadiyah Surakarta.

	PDF (Naskah Publikasi) Naskah Publikasi.pdf Restricted to Repository staff only Download (687kB)
	PDF (Surat Pernyataan Publikasi) Surat Pernyataan Publikasi.pdf Restricted to Repository staff only Download (731kB)

Abstract

The rapid population growth in North Jakarta increases the demand for vertical housing; however, the construction of high-rise buildings in this region faces serious challenges due to high seismic activity and the predominance of soft soil. This study designs a 7 story apartment building structure in North Jakarta using the Special Moment Resisting Frame (SMRF) system in accordance with SNI 1726:2019 and SNI 2847:2019, utilizing three dimensional modeling via ETABS 22 with the response spectrum method. The materials used are concrete with a compressive strength of f'c = 30 MPa and reinforcing steel with a yield strength of fy = 420 MPa. Soil test results indicate an N-SPT of 7,346, classifying the location as Site Class SE with seismic parameters of SDS = 0,6618 g and SD1 = 0,6276 g, thus placing the building in Seismic Design Category D. Structural analysis proves that all safety requirements are met: a cumulative mass participation of >90% is achieved at the 5th mode, and the inter-story drift remains below the allowable limit set by the SNI standard. The dimensions of the upper structure elements include K1 columns (700×700 mm), K2 columns (600×600 mm), primary beams (400×700 mm), secondary beams (250×550 mm), as well as floor and roof slabs with a thickness of 120 mm. The substructure utilizes precast concrete driven pile foundations with a diameter of 450 mm at a depth of 18 m, pile caps measuring 2400×2400×1500 mm, and tie beams of 400×700 mm. The overall design is declared to fulfill the strength, stiffness, and ductility requirements according to the applicable national standards.

Item Type:	Thesis (Skripsi)
Uncontrolled Keywords:	Apartment, ETABS, SMRF, SNI 1726:2019, Driven Pile.
Subjects:	T Technology > T Technology (General) T Technology > TA Civil Engineering > Teknik Kontruksi, Pondasi T Technology > TH Building construction
Divisions:	Fakultas Teknik > S1 Teknik Sipil
Depositing User:	RIZKI DIMAS DWITIANTO
Date Deposited:	07 Jul 2026 03:57
Last Modified:	07 Jul 2026 03:57
URI:	http://eprints.ums.ac.id/id/eprint/145973

Actions (login required)

View Item