Karakteristik Partikel Ijuk Mesh 100 Menggunakan Matrik Karet Dengan Carbon Black Pada Komposisi Serbuk Ijuk 10 PHR, 15 PHR, 20 PHR Terhadap Kekuatan Tarik dan Sobek

Apriyanto, Riki Dwi and , Masyrukan, ST, MT (2017) Karakteristik Partikel Ijuk Mesh 100 Menggunakan Matrik Karet Dengan Carbon Black Pada Komposisi Serbuk Ijuk 10 PHR, 15 PHR, 20 PHR Terhadap Kekuatan Tarik dan Sobek. Skripsi thesis, Universitas Muhammadiyah Surakarta.

[img] PDF (NASKAH PUBLIKASI)
NASKAH PUBLIKASI.pdf

Download (1MB)
[img] PDF (HALAMAN DEPAN)
HALAMAN DEPAN.pdf

Download (1MB)
[img] PDF (BAB I)
BAB I.pdf

Download (155kB)
[img] PDF (BAB II)
BAB II.pdf
Restricted to Repository staff only

Download (489kB)
[img] PDF (BAB III)
BAB III.pdf
Restricted to Repository staff only

Download (1MB)
[img] PDF (BAB IV)
BAB IV.pdf
Restricted to Repository staff only

Download (629kB)
[img] PDF (BAB V)
BAB V.pdf
Restricted to Repository staff only

Download (295kB)
[img] PDF (DAFTAR PUSTAKA)
DAFTAR PUSTAKA.pdf

Download (109kB)
[img] PDF (LAMPIRAN)
LAMPIRAN.pdf
Restricted to Repository staff only

Download (2MB)
[img] PDF (SURAT PERNYATAAN PUBLIKASI ILMIAH)
SURAT PERNYATAAN.pdf
Restricted to Repository staff only

Download (169kB)

Abstract

The research of this fibers particles is aimed to find out how big metal element, tensile strength, elongation break, and tear strength of specimen to fiber mesh particles 100 by using rubber matrix with variation of composition 10 phr, 15 phr, 20 phr, The initial process of making specimens by preparing tools such as: press tools, blenders, hammers, stone mortars. And materials such as fiber fibers, concentrated latex with 60% dry rubber content, ZDEC, Ionol, Zno, Sulfur, Darvan, Carbon Black. Ijuk is used as filler material. Fiber fibers done washing process, drying, then pressed, pounded, blender, and filtering using mesh 100 to become fiber powder. The chemical dispersion process is carried out for 24 hours. Mixing the specimen material using a glass, stirring for 10 minutes. And poured into the mold. Vulcanization using open that is heated for 1 1/2 hours with a temperature of 80º, The results of x-ray test concluded that the highest value of Zn metal element in the composition of ijuk 10 phr with the value of 3.192% and the lowest on the composition of 20 phr fibers with a value of 2.403%. The highest value of Ti metal element on the composition of ph. Phr fiber with a value of 0.411% and the lowest on the composition of 20 phr fibers with a value of 0.292%. For the element of Fe metal the highest value on the composition of 20 phr fibers with value of 1.002% and the lowest value on the composition of 15 phr fibers with a value of 0.486%. Tensile strength test results in the largest tensile strength on the composition of 20 phr fibers with the value of 4.50 N / mm^2and the smallest On the composition of 10 phr fibers with a value of 2.00 N / mm^2. The largest breakdown elongation test was obtained on the composition of 20 phr fibers with the value of 569.33% and the smallest in the composition of 10 phr fibers with a value of 308%. The largest tear strength test was produced on the 20 phr fibers composition with a value of 8.39 N / mm^2and the smallest on the 15 phr fibers composition with a value of 5.94 N / mm^2.

Item Type: Thesis (Skripsi)
Uncontrolled Keywords: X Ray, Ijuk, Carbon Black, Mesh 100, Dispersion, Vulcanization
Subjects: T Technology > TJ Mechanical engineering and machinery
Divisions: Fakultas Teknik > Teknik Mesin
Depositing User: RIKI DWI APRIYANTO
Date Deposited: 18 Aug 2017 08:25
Last Modified: 18 Aug 2017 08:25
URI: http://eprints.ums.ac.id/id/eprint/55733

Actions (login required)

View Item View Item